What we do for you
From the first review of your model to the finished, inspected part on your dock.
Six services, one shop
- Service 01
CNC milling
Simultaneous 5-axis milling on DMG DMU machines, plus bridge mill and vertical capacity for large plate and structural work.
- 5-axis contoured surfaces and compound angles
- Hard milling up to 60 HRC
- Parts up to 118 × 48 × 36 in
- Prototype through medium-volume runs
- Service 02
CNC turning
Turned components to ⌀ 15 × 24 in, with live tooling and C-axis work so many parts finish complete in one setup.
- Shafts, bushings, flanges and housings
- C-axis milling and cross drilling
- Threading, grooving and boring
- Bar and billet stock
- Service 03
Engineering support
We review your model before we cut, and flag anything that will cost you money in the shop but nothing to change on screen.
- Design for manufacture review
- Fixture and workholding design
- CAM programming and simulation
- Material and process selection
- Service 04
Inspection
Dimensional inspection on a Mitutoyo CMM with a 35 × 40 × 24 in measuring range, before anything leaves the floor.
- First article inspection
- In-process dimensional checks
- GD&T verification per ASME Y14.5
- Written dimensional reports
- Service 05
Secondary operations
We manage heat treatment, finishing and specialist processes through vetted partners so you place one order, not five.
- Heat treatment and stress relief
- Anodising, plating and painting
- EDM and wire cutting
- Gear cutting and splines
- Service 06
Fabrication and assembly
Welded frames, brackets and sub-assemblies machined and fitted so the part arrives ready to install.
- Welded and fabricated structures
- Machining of weldments
- Component sub-assembly
- Kitting and packaging
Secondary operations
Everything after the cut
We coordinate the outside processes ourselves, track the schedule and inspect the parts when they come back.
Heat treatment
Hardening, tempering, annealing and stress relief scheduled around the machining sequence so parts hold size.
Surface processing
Anodising, plating, powder coating, painting, passivation and bead blasting through approved finishers.
EDM
Wire and sinker EDM for sharp internal corners, keyways and features that cannot be reached with a cutter.
Gear work
Spur gears, splines, racks and toothed profiles cut to drawing and inspected before assembly.
Project management
Complete project management
One point of contact from quote to delivery. We handle material purchase, machining, outside processing, inspection and shipping, and we tell you where the job stands without being chased.
Send whatever you have. A finished 3D model is fastest, but a scanned print or a sample part is enough for us to start.
| Input | Formats accepted | How we use it |
|---|---|---|
| 3D CAD model | STEP, IGES, Parasolid, SLDPRT | Preferred: straight to CAM |
| 2D drawing | DWG, DXF, PDF | Tolerances, finishes and notes |
| Scanned blueprint | PDF or image scan | We redraw where needed |
| Sample part | Physical part | Measured and reverse engineered |
| Sketch or photo | Any legible format | We call you to confirm intent |